How to Access Linux Files from Windows 10 [Full Guide] (2022)

What’s a Linux file system? Can I read Linux drive on Windows? How to access Linux files from Windows 10? A lot of users are confused about these questions. In the article, MiniTool will explore them one by one together with you.

If you have a Linux distribution alongside a Windows system on the laptop or desktop, you may need to access Linux files from Windows 10. After analyzing lots ofuser reports on forums, we conclude the following questions that are frequently talked about. Let’s start exploring them in detail.

What’s Linux File System

In order to access Linux files from Windows successfully, the first thing you should figure out is what file system is supported by Linux. The common Linux Files Systems are Ext2, Ext3, and Ext4.

At present, Ext4 has become the default file system for most Linux distributions including Debian and Ubuntu. This is because the Ext4 provides more flexibility for storing large files than other extended file systems. It’s reported that the Ext4 can support storing a file up to 16TB and creating a partition up to 1EB.

Top recommendation: How to Install Linux (Ubuntu) on Windows 10 [Ultimate Guide 2021]

Can I Access Linux Files from Windows 10

There are a lot of users who have Windows 10 plus Linux dual boot or a hard drive formatted with Ext4. So, here comes a new question. Can I access Linux files from Windows 10? As discussed above, the most common Linux file system is Ext4. That is to say, you have to read Ext4 from Windows if you want to access Linux files.

However, the Ext4 file system is not supported by Windows. When right-clicking the Ext4 partition, you will find the Open and other function menus become greyed out. Obviously, you can’t access Ubuntu files from Windows directly. What can I do if I have to read Linux drive on Windows? Please keep reading the following part.

How to Access Linux Files from Windows 10 [Full Guide] (1)

How to Access Linux Files from Windows 10

Since Windows 10 doesn’t offer any direct methods to access Ext4, you need to utilize some professional tools to access Linux files from Windows. Here we summarize top 4 Ext4 partition readers on Windows.

Method 1. Use Ext4 Partition Manager - MiniTool Partition Wizard

MiniTool Partition Wizard is an all-in-one partition manager that supports many file systems including FAT16/32, NTFS, exFAT, and Ext2/3/4, Linux Swap. With this powerful software, you can format a hard drive, convert NTFS to FAT, convert MBR to GPT, recover lost data, migrate OS to SSD/HD, rebuild MBR, and so forth.

Free DownloadBuy Now

In order to access Ext4 from Windows smoothly, you can make it accessible by formatting it to NTFS. Although formatting will delete the data on the hard drive, MiniTool can help you restore the Ext4 partition data so that you can access Linux files from Windows 10.

Part 1. Read Linux Drive on Windows

Follow the steps below to format the Ext4 partition to NTFS or other file systems that are supported by Windows 10.

Step 1. Launch the MiniTool Partition Wizard to enter its main interface, and then right-click the Ext4 partition from the disk map and select Format.

How to Access Linux Files from Windows 10 [Full Guide] (2)
(Video) How to Run Linux/Bash on Windows 10 Using the Built-In Windows Subsystem for Linux

Step 2. In the pop-up window, select NTFS from the drop-down menu and click on OK to continue.

Step 3. Click on Apply button to execute the operation.

How to Access Linux Files from Windows 10 [Full Guide] (3)

Part 2: Restore Data from the Ext4 Partition

Now, you should make the Ext4 accessible on Windows 10. Another question is how to regain data from the formatted partition. Here MiniTool Partition Wizard is capable of restoring Ext4 partition data. Please continue with the following steps.

Tip: MiniTool Partition Wizard Free Edition doesn’t support data recovery. You need to install a professional edition or a more advanced edition to recover the lost partition.

Buy Now

Step 1.In the main interface, select the partition that you just formatted to NTFS and click on Partition Recoveryfrom the top toolbar. Click on Next in the pop-up window.

How to Access Linux Files from Windows 10 [Full Guide] (4)

Step 2.Choose a scanning range based on your needs. There are 3 ranges to scan the disk includingFull Disk,Unallocated Space, andSpecified Range. Here we take Full Disk for example and click onNextto go on.

How to Access Linux Files from Windows 10 [Full Guide] (5)

Step 3.Select a scanning method to scan the disk and clickNext to continue.

How to Access Linux Files from Windows 10 [Full Guide] (6)

Step 4.Make sure that you check all partitions including existing partitions and deleted/formatted partitions. Wait for some time until the scanning completes and click on theFinishbutton.

How to Access Linux Files from Windows 10 [Full Guide] (7)
(Video) Linux Terminal & GUI Inside of Windows 10 (WSL)

Step 5. Click on Apply button to recover the formatted partition on the hard disk.

How to Access Linux Files from Windows 10 [Full Guide] (8)

Up till now, the formatted partition should be recovered, and then you can read Linux partition Windows 10 and access its files.

Also, you can try the other three utilities to access Ext4 from Windows 10. Let’s keep reading!

Method 2. Use Ext2Fsd

Ext2Fsd is a Windows file system driver that supports the Ext2/3/4 file system. It allows you to read Linux partition Windows 10 and access Ubuntu files by mounting the Ext4 partition and assigning a drive letter. You can lunch the Ext2Fsd at every boot or only open it when you need it.

To access Ext4 from Windows, follow the steps below:

Step 1. Install this tool on your Windows 10 PC and launch the driver.

Note: If you don’t want to automatically launch the software at every boot, don’t tick the checkbox for Make Ext2Fsd automatically started when system boots.

How to Access Linux Files from Windows 10 [Full Guide] (9)

Step 2. In the main interface of Ext2Fsd, navigate to the Tools tab and select Service Management from the context menu.

Tip: If you haven’t set Ext2Fsd to automatically start at boot, you need to select Tools > Service Management > Start Ext2Fsd service before you access Linux files from Windows 10.

How to Access Linux Files from Windows 10 [Full Guide] (10)

Step 3. In the Ext2Fsd Service Management window, select the checkboxes for Mount all volumes in read-only mode and Assign drive letter automatically. Then click on Apply to execute the operation. After that, this tool will automatically mount and assign drive letters to the Linux partitions.

How to Access Linux Files from Windows 10 [Full Guide] (11)
(Video) How to Install Linux Terminal on Windows 10

Step 4. Press Win + E keys to open File Explorer, and then you will find the Ext4 partitions are mounted with their own drive letters and you can directly access Ubuntu files from Windows.

Method 3. Use DiskInternals Linux Reader

DiskInternals Linux Reader is a free utility to access Linux files from Windows 10. This tool can not only support the Ext4 file system but ReFS, HFS, and HFS+ file systems. Different from Ext2Fsd, this program allows you to read Linux drive on Windows within this application.

Step 1. Install DiskInternals Linux Reader on your Windows PC and launch it to enter the main interface.

Step 2. After the Linux Reader detects all partitions on your hard drive, navigate to the Ext4 partition from the list of drives.

Step 3. Double click the Ext4 partition to open it and then you can preview and access the saved data on the drive.

Step 4. If you want to make full use of the Linux files on Windows, you have to transfer the files from the Ext4 partition to another location that is supported by the Windows file system. Here right-click the file that you need and click on Save from the context menu.

How to Access Linux Files from Windows 10 [Full Guide] (12)

Step 5. Select the Save Files option and click on Next button.

How to Access Linux Files from Windows 10 [Full Guide] (13)

Step 6. Click on Browse button to select a location where you save the file and click on OK. Then click on Next. Wait for some time until the file is saved to your selected location.

How to Access Linux Files from Windows 10 [Full Guide] (14)

Method 4. Use Ext2explore

Ext2explore is a practical explorer that can access Ext2/3/4 files on Windows 10. It works similarly to DiskInternals Linux Reader, but it doesn’t allow you to preview files using Ext2explore. This utility doesn’t have to be installed and you can run the .exe file directly.

Bear in mind that you must run the Ext2explore.exe program as an administrator, or you will receive an error message.

Step 1. Right-click the Ext2explore.exe file that you download to Windows PC and select Run as administrator.

Tip: Also, you can right-click the Ext2explore.exe and select Properties. Then go to the Compatibility tab and select the checkbox for Run this program as an administrator > OK.

(Video) Ubuntu Complete Beginner's Guide: Files & Folders

How to Access Linux Files from Windows 10 [Full Guide] (15)

Step 2. Now, you can access the Ext4 partition and its Linux files. To open the files in the Windows system, you need to save them to the Windows partition. Right-click on the file and select Save, then navigate to another location to save files on the Windows system.

How to Access Linux Files from Windows 10 [Full Guide] (16)

I have Windows 10 and Linux a dual boot system. Although Linux distribution has built-in support for Windows NTFS partition, Windows can’t read Linux drive. Fortunately, I found 4 effective methods to access Linux files from Windows 10. Probably you also need this post.Click to Tweet

What’s Your Opinion

This post mainly focuses on how to access Linux files from Windows 10. You can choose one from the top 4 utilities to access Ext4 from Windows. If you have any better ideas on this topic, please share them in the comment area. Also, you can send us an email via [emailprotected] if you have any questions about the MiniTool software.

Access Linux Files from Windows 10 FAQ

How to transfer files from Windows to Linux?

After analyzing lots of user reports and references, we summarize the following 5 methods to transfer files between Windows and Linux.

  1. Use the Share network folders.
  2. Transfer files from Windows to Linux via FTP.
  3. Securely copy the files or folders to Linux via SSH.
  4. Share the files via sync software.
  5. Use the shared folder in Linux virtual machine.

How to mount a Linux folder in Windows?

Here are detailed steps to mount a Linux folder in Windows.

  1. Press Win + E keys to open the File Explorer, and then map your Linux home folder or directory on Windows.
  2. Click on Tools at the top menu and select Map network drive.
  3. Select the drive letter from the drop-down menu and click on Browse to select the folder that you want to mount.
  4. Click on Finish

How to access a network drive in Linux?

  1. Open a terminal on your Linux, and then typesudo apt-get install smbfs in it and hit Enter.
  2. Type thesudo yum install cifs-utils line in terminal and press Enter.
  3. Execute the sudo chmod u+s /sbin/mount.cifs /sbin/umount.cifs
  4. Use the cifs utility to map a network drive to storage.
(Video) How to transfer files between Windows and Linux using WinSCP

How to access a shared folder in Linux?

The first and simplest method is to press Alt + F2 keys to open the Run dialog box, and then type smb:// followed by the IP address of your Linux sever and the folder name. Then click on theRun button.

FAQs

How do I access Linux files on Windows 10? ›

First, the easy one. From within the Windows Subsystem for Linux environment you want to browse, run the following command: explorer.exe . This will launch File Explorer showing the current Linux directory — you can browse the Linux environment's file system from there.

How do I view Ubuntu files in Windows 10? ›

Just look for a folder named after the Linux distribution. In the Linux distribution's folder, double-click the “LocalState” folder, and then double-click the “rootfs” folder to see its files. Note: In older versions of Windows 10, these files were stored under C:\Users\Name\AppData\Local\lxss.

Can Windows 10 read Linux file system? ›

The feature lets users access Linux file systems, such as ext4, that aren't natively supported by Windows. It also means those who are dual-booting Windows and Linux with different disks can now access Linux files from Windows.

How do I access WSL filesystem? ›

Whenever you are in a directory in WSL that you would like to access from File Explorer, simply type: $ explorer.exe . $ explorer.exe . $ explorer.exe .

How do I connect to a Linux server from Windows? ›

How to connect via SSH:
  1. Open the list of your servers. Click the one you need and click the button "Instructions". ...
  2. Open a terminal (for Linux) or a command line (for Windows) on your computer. Enter the command: ssh [username]@[server IP] ...
  3. The connection will ask for a password.

How do I remotely access a Linux terminal from Windows? ›

Connect to Linux Remotely Using SSH in PuTTY
  1. Select Session > Host Name.
  2. Input the Linux computer's network name, or enter the IP address you noted earlier.
  3. Select SSH, then Open.
  4. When prompted to accept the certificate for the connection, do so.
  5. Enter the username and password to sign in to your Linux device.
Feb 5, 2022

How do I find Linux files on Windows? ›

To access the Linux subsystem files or Linux Bash files on Windows 11/10, you need to go to %userprofile%\AppData\Local\Packages. Alternatively, you can go to C:\Users\user-name\AppData\Local\Packages in the File Explorer. However, you must show hidden files to access the AppData folder in the C drive or system drive.

How do I find my Linux partition in Windows 10? ›

Find your Linux partition, under either Hard Disk Drives or Drives with Removable Storage. You can either double-click to view your files, or right-click and select Open Partition from the drop-down menu instead. You'll see a split-screen, with the top half showing files and folders on your Linux drive.

How do I access a shared folder in Windows 10 from Linux? ›

Access a Windows shared folder from Linux using Nautilus

From the File menu, select Connect to Server. In the Service type drop-down box, select Windows share. In the Server field, enter the name of your computer. Click Connect.

How do I map a Linux drive to Windows? ›

You can map your Linux home directory on Windows by opening Windows Explorer, clicking on "Tools" and then "Map network drive". Choose drive letter "M" and path "\\server\loginname". While any drive letter will work, your profile on Windows has been created with M: mapped to your HOMESHARE.

How do I view a file in Linux? ›

Cat. The simplest way to view text files in Linux is the cat command. It displays the complete contents in the command line without using inputs to scroll through it. Here is an example of using the cat command to view the Linux version by displaying the contents of the /proc/version file.

Can Windows 10 read and write EXT4? ›

Can Windows 10 read write EXT4? Windows 10 cannot read write EXT4 drive directly, as it is Linux file system. EXT4 is not natively supported by Windows, but this does not mean you cannot open or read EXT4 drive on Windows 10/8/7. To do this, you just need the help of third-party disk partition software.

How do I mount a Linux drive in Windows 10? ›

To Mount Linux File System in Windows 10,

Type the following command to list the available physical disks, and press Enter: wmic diskdrive list brief . See the DeviceID value to find the required drive. Type the following command to mount the drive, and press Enter: wsl --mount DISKPATH [--Partition <number> .

How do I find my Linux partition in Windows 10? ›

Find your Linux partition, under either Hard Disk Drives or Drives with Removable Storage. You can either double-click to view your files, or right-click and select Open Partition from the drop-down menu instead. You'll see a split-screen, with the top half showing files and folders on your Linux drive.

How do I share files between Windows and Linux? ›

The easiest and most reliable way to share files between a Linux and Windows computer on the same local area network is to use the Samba file-sharing protocol. All modern versions of Windows come with Samba installed, and Samba is installed by default on most distributions of Linux.

How do I view a file in Linux? ›

Cat. The simplest way to view text files in Linux is the cat command. It displays the complete contents in the command line without using inputs to scroll through it. Here is an example of using the cat command to view the Linux version by displaying the contents of the /proc/version file.

Videos

1. How To Install XAMPP 8.1.6 Hosting Server On Windows 10/11 Apache PHP MySQL And HTML ~LocalHost 2022
(🎬 Era24UK)
2. 1. How to install Apache JMeter | JMeter Tutorial
(UTF-8)
3. Kali Linux on Windows in 5min (WSL 2 GUI)
(NetworkChuck)
4. How to Dual boot Windows 10 and Linux (Beginner's Guide)
(Average Linux User)
5. Windows 10 Bash & Linux Subsystem Setup
(Traversy Media)
6. How to Backup Windows 10 Using File History (Beginners Guide)
(TechGumbo)

Top Articles

Latest Posts

Article information

Author: Dan Stracke

Last Updated: 12/01/2022

Views: 6681

Rating: 4.2 / 5 (63 voted)

Reviews: 86% of readers found this page helpful

Author information

Name: Dan Stracke

Birthday: 1992-08-25

Address: 2253 Brown Springs, East Alla, OH 38634-0309

Phone: +398735162064

Job: Investor Government Associate

Hobby: Shopping, LARPing, Scrapbooking, Surfing, Slacklining, Dance, Glassblowing

Introduction: My name is Dan Stracke, I am a homely, gleaming, glamorous, inquisitive, homely, gorgeous, light person who loves writing and wants to share my knowledge and understanding with you.